500MK2 only
Tools needed:
– Allen tool size 3
– Wrench 11mm
– Allen tool size 3
– Wrench 11mm
Steps:
1. Mount the bridle wires on the bridle connector. Use the clevis pins 1/2 x 1/4.
2. Connect the bridles to the bridle pins.
If you are installing a spinnaker kit also do the following steps.
3. For a snuffer system: Install the ring 3×20 ss under the fork terminal on the port side as shown in the picture.
4. For the 500MK2: Install bowsprit connector plates on both bridle terminals.
