[one_third]
[/one_third][one_third]
[/one_third]
[one_third_last]
[/one_third_last][one_third]
[/one_third]
[one_third]
[/one_third][one_third_last]
[/one_third_last][one_third]
[/one_third][one_third]
[/one_third][one_third_last]
[/one_third_last][one_third_last]
[/one_third_last]
– Torque wrench
Required tools:
– 5/16 or 8 mm hex socket
– 9/16 or 14 mm hex socket
– Philips screwdriver
– Grease
End result
Steps
1.
2.
Take time to align the crossbars !
3.
4.
Do not exceed the recommended 30 Nm, over-tightening the bolts results in damaged threads.
5.
6.
Do not exceed the recommended 30 Nm, over-tightening the bolts results in damaged threads.