![](https://nacrasailing.com/wp-content/uploads/2021/07/30845-Ring-3x15mm-ss.png)
![](https://nacrasailing.com/wp-content/uploads/2021/07/30845-Ring-3x15mm-ss.png)
![](https://nacrasailing.com/wp-content/uploads/2022/07/Rigging-set-scaled-1-edited.jpg)
![](https://nacrasailing.com/wp-content/uploads/2022/07/Rigging-set-scaled-1-edited.jpg)
![](https://nacrasailing.com/wp-content/uploads/2022/07/30685_shackle-6mm-1024x595.png)
![](https://nacrasailing.com/wp-content/uploads/2022/07/30685_shackle-6mm-1024x595.png)
1. Mount the bridle wires on the shackle
2. Connect the bridle to the bridle pins.
If you are installing a spinnaker kit also do the following step.
3. Install the ring 3×20 ss under the fork terminal on the port side as shown in the picture.
![](https://nacrasailing.com/wp-content/uploads/2021/06/Bridle-ring-scaled-e1624979537434-768x1024.jpg)
![](https://nacrasailing.com/wp-content/uploads/2021/06/Bridle-ring-scaled-e1624979537434-768x1024.jpg)