Press Ctrl/Cmd + P to print
or save as PDF

Hicking strap installation



1. Tie the rear end of the hiking straps by using the hiking strap ties.
2. Make a bowline knot in one end(A) of the line.
3. Loop the other end (B) through the hiking strap tie on the beam and the hiking strap.
4. Loop B through the bowline and back through the hiking strap and the hiking strap tie.
5. Tension the hiking strap by pulling on B.
6. Secure the line by knotting B with an overhand knot to the bowline.
7. Tie off any remaining line ends with half hitches.