Search
Close this search box.

Trapeze wires Dyneema installation

Estimated reading time: < 1 min
Tools needed:
– Long-nose plier
– Self amalgamating tape

Steps:

1. Use the shackle 6mm 1/4, 2x nylon washers, and the trapeze ropes

2. Put the shackle through the center hole.

Tighten the shackle firmly with the long-nose plier.

3. Install two trapeze ropes on each side.
4. Tape the shackle with self-amalgamating tape.

Choose your trapeze version:

Applicable to boats:
Was this article helpful?
Dislike 0

Continue reading

Previous: Trapeze wires steel installation
Next: Trapeze wires: Standard hook
Scroll to Top