Press Ctrl/Cmd + P to print
or save as PDF




1. Use the strap eye on the rear beam to tie the V-strap in the middle.
2. Make a bowline knot in one end(A) of the line.
3. Loop the other end (B) through the strap eye on the beam and the V strap.
4. Loop B through the bowline and back through the V strap and the strap eye.
5. Tension the V strap by pulling on B.
6. Secure the line by knotting B with an overhand knot to the bowline.
7. Tie off any remaining line ends with half hitches.