Empowering sailors since 1975
  • Prices for:
  • Jib Sheet Self-tacking

  • Estimated reading time: < 1 min
  • Requirements

  • req-1
    Jib Cunningham line - 4mm, 0.6m, black
  • req-2
    Velcro

Steps

  • 1. Hook the S-hook on the jib, make sure the upper hook is facing the mast.

  • 1-hoist-jib-s

    2. When closing the zipper, make sure the halyard is zipped in the luff of the sail. Hoist the jib in small episodes in order to zip down.

  • 2-hoist-jib-s

    3. Hoist the jib until the S-hook is pulled through the ring.

  • 3-hoist-jib-s
  • 4. Gently pull the jib down to lock the S-hook in the ring.

  • 5. Install the jib downhaul line by feeding it through the eyelet, wrapping it around the pole, and fixating it to the base with a bowline.

  • 4-hoist-jib-s

    6. Wrap the velcro tape around the front turnbuckle.

  • 5-hoist-jib-s

    7. Attach the jib sheet small to the clew of the sail./p>