Empowering sailors since 1975
  • Prices for:
  • Cunningham 1:16 Rigging

  • Estimated reading time: < 1 min
  • Required items


    • 2x 25mm wire high-load block HarkenĀ®

Steps

  • 1. Install the two 25mm wire blocks on the loops at both sides of the mainsail.

  • 1-cunningham-1-16

    2. Feed the white line of the Cunningham system through the wire block and affix it in the clamcleat mounted on the mast. Secure it with a figure 8 knot.