-
Hiking Strap Installation
-
Estimated reading time: < 1 min
-
Requirements
-
2x Hiking strap tie - 3mm, 0.6m, black
Steps
-
1. Tie the rear end of the hiking straps by using the hiking strap ties.
-
2. Make a bowline knot in one end (A) of the line.
-
3. Loop the other end (B) through the hiking strap tie on the beam and the hiking strap.
-
4. Loop B through the bowline and back through the hiking strap and the hiking strap tie.
-
5. Tension the hiking strap by pulling on B.
-
6. Secure the line by knotting B with an overhand knot to the bowline.
-
7. Tie off any remaining line ends with half hitches.
