-
Trapeze Wires - Steel Installation
-
Estimated reading time: 1 min
-
Requirements
-
Tools needed
- Long-nose pliers
- Self-amalgamating tape
Steps
-
1. Use the shackle 6mm 1/4, 2x nylon washers, and the trapeze wires.
-
2. Put the shackle through the center hole.
-
Tighten the shackle firmly with the long-nose plier.
-
3. Install two trapeze wires on each side.
-
4. Tape the shackle with self-amalgamating tape.
