-
Jib Sheet Self-tacking
-
Estimated reading time: 1 min
-
Requirements
-
Carbo 29 block HarkenĀ®
-
Jib sheet small - 3mm, 3.5m, black
-
5mm D Shackle
Steps
-
1. Use the jib sheet small, one carbo 29mm block and a shackle D 5mm.
-
2. Knot one end to the middle of the 29mm block with a bowline and feed the jib sheet small from top to bottom through the first sheave of the double block located on the traveler of the self-tacking track.
-
3. Feed the line back from the bottom to top through the carbo 29mm block and back through the second sheave of the double block from top to bottom.
-
4. Feed the line from top to bottom through the block on the bowsprit located on the starboard side.
-
5. Knot the line to the T2 carbo 18mm block.
-
6. Feed the pre-installed traveler line of the jib through the cleat mounted on the bowsprit to range the track.