-
Beam Assembly Threaded
-
Estimated reading time: < 1 min
-
Requirements
-
Tools needed
- Torque wrench
- 5/16 or 8 mm hex socket
- 9/16 or 14 mm hex socket
- Philipshead screwdriver
- Grease
Steps
-
-
-
Take time to align the crossbars!
-
-
-
-
Do not exceed the recommended 30 Nm, over-tightening the bolts results in damaged threads!
-
-
-
-
Do not exceed the recommended 30 Nm, over-tightening the bolts results in damaged threads!
