-
Righting Line
-
Estimated reading time: < 1 min
-
Requirements
-
Tools needed
- Torque wrench
- 5/16 or 8 mm hex socket
- 9/16 or 14 mm hex socket
- Philipshead screwdriver
- Grease
Steps
-
1. Tie one end of the righting line on the mast pin under the front beam.
-
2. Take the other end of the righting line and feed it through the eye in the trampoline.
-
3. Tie a figure-eight knot in the righting line just above the eye in the trampoline.
-
4. Put the rest of the line away in the trampoline pocket.
