-
Jib Sheet 1 to 2
-
Estimated reading time: < 1 min
-
Requirements
Steps
-
1. Take two 40mm blocks and connect them using a shackle.
-
2. Knot to the starboard cleat on the front crossbar
-
3. Lead through one of the two 40mm blocks.
-
4. Lead through the cleat from front to aft.
-
5. Thread through the port cleat from aft to forward.
-
6. Through the other 40mm block.
-
7. And knot the end to the port cleat.
