-
Mast Rotation Non-continuous System Installation
-
Estimated reading time: < 1 min
-
Requirements
-
Soft shackle -
Rotation line - 4mm, 4.75m, black
-
Lead ring 8mm Harken® (31879)
Overview
Steps
-
1. Fixate the rotation line on the starboard side in the rear cam cleat and feed it between the trampoline and the tramp lace underneath the trampoline. Pull it upwards through the big eyelet in the middle.
-
-
2. Feed the line through the Harken lead ring and return it down below through the same eyelet towards the port side.
-
3. Feed the line between the trampoline and tramp lace, through the rear camcleat and the ring.
